Overview
Fincor 2330 Series 0.125
hp to 3 hp
115-230 Volts
Isolated Non-Regenerative DC Drives
Overview
Fincor 2330 Series drives features a fully isolated regulator
using surface mount technology. It includes an isolated customer
run contact, low voltage operator control circuitry, and full wave
power conversion.
Key Features
- 1/8 to 3 hp (115-230V)
- Fully Isolated Regulator
- Speed or Torque Control
- 0-10 VDC or 4-20 mA Input Signal
- Fused Input
- Line Start (Auto Restart)
- Dual Field Supply
- Tachometer Input standard
Non-Regenerative Drives
Non-regenerative drives are typically used on applications which
primarily motor in one direction and stopping is achieved through
friction or infrequent use of a dynamic braking resistor. These
drives may provide speed or torque control from a potentiometer or
unidirectional (0-10 VDC or 4-20 mA) control signal. Reversing
requires a switch or contact closure to initiate the change. Upon
the reversing signal, the drive will allow the motor to coast to a
stop (or perform a control stop under a decel ramp with control
stop option) or utilize a dynamic braking resistor to pull it to a
stop before switching the motor leads with a contactor and starting
the motor in the opposite direction.